UNIQ®SPERSE 553S

UNIQ®SPERSE 553 S is a wetting and dispersing additive for solvent based coating systems suited for the stabilization of inorganic, organic and carbon black pigments. It will help to reduce the viscosity and avoid flooding and floating. Suited for preparation of resin minimal pigment concentrates.

Special features
Color development 80%
Viscosity reduction 80%
Inorganic pgments 100%
Organic pigments 100%
Black pigments 80%

 

  • Solvent based applications
  • Prevents flooding and floating
  • Organic and Inorganic pigment
  • Improves gloss and DOI
  • Suited for resin minimal pigment concentrates

Solid content:            45%

Solvent:                      n-BA/PMA

Density:                      1.0 g/cm3

Amine value:             14 mg KOH/g

Appearance:              Yellowish clear liquid

Architectural coatings

Wood and furniture coating

Automotive and refinish coatings

Can and coil coating

Pigment concentrates

Protective coatings

Amount of solid additive based on pigment (SOP):

  •  Inorganic pigments                                   2 – 5%
  • Titranium dioxide                                        1 – 3%
  • Organic pigments                                   15 – 30%
  • Carbon Black                                           20 – 40%
 
The above recommended levels can be used for orientation and needs to be optimized by testing.
EN
CN
Order sample
EN
CN

UNIQ®SPERSE FA 625

[:en]UNIQ® SPERSE FA 625 is wetting and dispersing additive for all kind of pigments in water- and solvent-based systems, especially for decorative coatings and preparation of universal pigment concentrates including compatibility for long oil alkyd resins. Furthermore the additive can give colour acceptance and works as a compatibilizer.

Order sample

Technical Data sheet

EN
CN

UNIQ®SPERSE 563 S

UNIQ® SPERSE 563 S is a wetting and dispersing agent for solvent based automotive coating, industrial coating, composite’s color paste and pigment concentrates. It is applied for dispersing organic and inorganic pigments, is suitable for 2kPU and high baking systems with excellent viscosity reduction, color development. It has excellent compatibility performance with multi-resin systems including CAB, promote property stability of final products, and has excellent anti-settling even though at the low viscosity conditions. Shows excellent transparency when dispersing multi-color pigments.

Special features
Color development 100%
Viscosity reduction 90%
Inorganic pgments 100%
Organic pigments 100%
Black pigments 80%
  • Solvent based applications
  • Suitable for both organic and inorganic pigments
  • Excellent anti-settling and anti-flooding and anti-floating
  • Excellent compatibility
  • Improves gloss and DOI
  • Good viscosity reduction

Solid content:            30%

Solvent:                      n-BA/PMA/Iso-Butanol

Density:                      1.01 g/cm3

Amine value:             9 mg KOH/g

Color                          Max 6

Appearance:             Yellowish clear liquid

Architectural coatings

Wood and furniture coating

Automotive and refinish coatings

Can and coil coating

Protective coatings

Amount of solid additive based on pigment (SOP):

  •  Inorganic pigments                                  2 – 5%
  • Titranium dioxide                                       1 – 3%
  • Organic pigments                                  15 – 50%
  • Carbon Black                                        20 – 100%
 
The above recommended levels can be used for orientation and needs to be optimized by testing.
EN
CN
Order sample
EN
CN

UNIQ®SPERSE 571 S

UNIQ®SPERSE 571 S is a wetting and dispersing additive for solvent based coatings and recommended to auto-coating, car refinish, industrial coating and pigment concentrates. Due to the good wetting and dispersing property of organic pigments especially carbon black, it can provide high levels of gloss, color strength, excellent transparency and excellent storage stability . To the high color carbon black pigment dispersing it will show the best jetness with blue hue.

Special features
Color development 100%
Viscosity reduction 100%
Inorganic pgments 60%
Organic pigments 100%
Black pigments 100%
  • Solvent based / UV applications
  • Suitable for both organic and inorganic pigments, espcially suited for carbon black
  • Improves color development and Chroma
  • Excellent jetness and blue undertone for HCC black
  • Improves gloss and color development
  • Strong viscosity reduction
  • Suited for resin free pigment concentrates

Solid content:            50%

Solvent:                      PMA

Density:                      1.02 g/cm3

Amine value:             36 mg KOH/g

Appearance:              Dark Brown liquid

Architectural coatings

Wood and furniture coating

Automotive and refinish coatings

Can and coil coating

Industrial Coatings

Pigment concentrates

Protective coatings

Amount of solid additive based on pigment (SOP):

  •  Inorganic pigments                                 2 – 12%
  • Titranium dioxide                                       1 – 5%
  • Organic pigments                                  15 – 50%
  • Carbon Black                                        20 – 100%
 
The above recommended levels can be used for orientation and needs to be optimized by testing.
EN
CN
Order sample
EN
CN

UNIQ®SPERSE 568 S

UNIQ® SPERSE 568 S is a wetting and dispersing additive for solvent based applications. The dispersant is especially developed for the grinding of carbon black to give excellent jetness and blue undertone. Also very well suited for inorganic or organic pigments.

Special features
Color development 100%
Viscosity reduction 100%
Inorganic pgments 80%
Organic pigments 100%
Black pigments 100%
  • Solvent based applications
  • Suitable for both organic and inorganic pigments, espcially suited for carbon black
  • Improves color development and Chroma
  • Excellent jetness and blue undertone for HCC black
  • Improves gloss and DOI
  • Strong viscosity reduction

Solid content:            50%

Solvent:                      PMA

Density:                      1.03 g/cm3

Acid value:                15 mg KOH/g

Amine value:             30 mg KOH/g

Color                          Max 7

Appearance:             Brownish liquid

Architectural coatings

Wood and furniture coating

Automotive and refinish coatings

Can and coil coating

Industrial Coatings

Pigment concentrates

Protective coatings

Amount of solid additive based on pigment (SOP):

  •  Inorganic pigments                                  2 – 5%
  • Titranium dioxide                                       2 – 5%
  • Organic pigments                                  15 – 40%
  • Carbon Black                                          20 – 80%
 
The above recommended levels can be used for orientation and needs to be optimized by testing.
EN
CN
Order sample
EN
CN

UNIQ®FOAM P-571

UNIQ®FOAM P-571  is a strong silicone free anti-foam and air-release agent for solvent-based and solvent free applications, especially suitable for systems based on unsaturated polyesters, epoxies, PVC plastisols and acrylic resin systems. The additive furthermore helps to improve the leveling.

Order sample
TDS
EN
CN
DE

UNIQ®SPERSE 580U

[:en]

UNIQ®SPERSE 580 U is a structured polymer wetting and dispersing additive for water-, solvent-  and solvent free based applications. Suitable for industrial, automotive coating and resin free pigment concentrates.

Order sample

Technical Data sheet

EN
CN
DE

UNIQ®SPERSE 586U

[:en]UNIQ®SPERSE 586 U is a wetting and dispersing additive for water base and solvent base, The dispersant suited for inorganic or organic pigments and resin free pigment concentrates. It shows good dispersibility and stability.  In baking system it shows excellent high temperature resistance to yellowing. And good water-resistance in waterborne application.

Order sample

          Technical Data sheet

EN
CN
DE

UNIQ®SPERSE 680U

[:en]UNIQ®SPERSE 680 U is a structured polymer dispersing agent for grinding organic and black pigments in water-, solvent- and solvent free based applications.Gives high jetness for HCC carbon black.

Order sample

Technical Data sheet

EN
CN
DE

UNIQ®FOAM P-595

UNIQ®FOAM 170 S is a strong anti-foam and air-release agent especially suitable for use in unsaturated polyesters, ambient curing plastic, adhesives and sealants, especially suited for UPE and epoxies based resin systems, The additive furthermore helps to improve the leveling and avoids pinholing and popping

Special features
Dip Coating 40%
Unsaturated polyester 100%
Self leveling flooring 100%
High viscues systems 80%

 

  • Quick de-aeration and defoaming effect for thermosetting resin system
  • Suitable for pigment loading coating systems
  • does not interfere intercoat adhesion
  • Silicone-free
  • Heat stable

Density:                      0.84 g/cm3

Color:                         Max 1

Appearance:              Slight hazy colorless liquid

Unsaturated Polyester resin

Adhesives and sealant

                Epoxy based

                PU based

Ambient curing plastic

                Epoxy based

                PU based

  • Based on total formulation:                0.1 – 1.0%

Added in grinding stage or under high shear forces incorporation.

 

EN
CN
Order sample
EN
CN

UNIQ®FOAM 132S

UNIQ®FOAM 132 S is medium to strong defoamer to be used in clear coatings as well suitable for pigmented coating systems. Due the chemical structure the product will not cause turbidity, but will give good air-release and macro defoaming properties. Also very well suited for PE primers remaining high clarity and transparency.

The product is well suited for spraying applications

Special features
Air spraying 100%
Airles spraying 80%
Dip / curtain coatings 80%
Brush / roller 100%

 

  • Strong defoamer
  • Suitable for clear coats and pigmented coatings systems
  • Does not interfere intercoat adhesion
  • Silicone-free
  • Heat stable

Solvent:                      PMA

Density:                      0.98 g/cm3

Color:                         Max 1

Appearance:              Yellowish clear liquid

PE primers

Polyurethane systems

NS systems

Baking systems

 

  • Based on total formulation:                0.1 – 1.0%
 
The above recommended levels can be used for orientation and needs to be optimized by testing.
EN
CN
Order sample
EN
CN

UNIQ®FOAM 120S

UNIQ®FOAM 120 S is a strong defoamer suitable for all solvent borne coating systems. It prevents the formation of foam during the manufacture and filling.

The additive has an immediate foam-destroying effect and does not have influence on the intercoat adhesion.

Due to the strong defoaming performances, the product is less suitable for high gloss clear coatings. Influence of transparency in clear systems should be evaluated.

Special features
Air spraying 60%
Airles spraying 100%
Dip / curtain coatings 40%
Brush / roller 60%

 

  • Strong defoamer
  • Suitable for clear coats and pigmented coatings systems
  • Does not interfere intercoat adhesion
  • Silicone-free
  • Heat stable

Solvent:                      Naphtha (petroleum) hydrtreated heavy

Density:                      0.8 g/cm3

Color:                         Max 1

Appearance:              Slight yellowish clear liquid

Architectural coatings

Wood and furniture coatings

Automotive and refinish coatings

Can / coil coatings

Industrial coatings

  • Based on total formulation:                0.1 – 1.0%

Added in grinding stage or under high shear forces incorporation.

 

Due to its strong incompatibility, the influence upon the transparency of clear systems or other surface defects must be evaluated.
The above recommended levels can be used for orientation and needs to be optimized by testing.
EN
CN
Order sample
EN
CN

UNIQ®SPERSE 765S

[:en]UNIQ®SPERSE 765 S is controlled flocculating wetting and dispersing additive for solvent-borne, medium-polarity to high-polarity coatings to prevent the flooding/floating of titanium dioxide in combination with colored pigments. Contains silicone to improve flooding/floating behavior.

Order sample

Technical Data sheet

EN
CN
DE

UNIQ®SPERSE 764S

[:en]UNIQ®SPERSE 764 S is controlled flocculating wetting and dispersing additive for solvent-borne, medium-polarity to high-polarity coatings to prevent the flooding/floating of titanium dioxide in combination with colored pigments.

Order sample

Technical Data sheet

EN
CN
DE

UNIQ®SPERSE 550S

UNIQ®SPERSE 550S is polyurethane wetting and dispersing additive for solvent based coating systems suited for the stabilization of inorganic, organic and carbon black pigments. is a wetting and dispersing additive for solvent based coating systems suited for the stabilization of inorganic, organic and carbon black pigments. It will help to reduce the viscosity and avoid flooding and floating. Suited for preparation of resin minimal pigment concentrates.

Special features
Color development 80%
Viscosity reduction 80%
Inorganic pgments 100%
Organic pigments 100%
Black pigments 80%

 

  • Solvent based applications
  • Prevents flooding and floating
  • Organic and Inorganic pigment
  • Improves gloss and DOI
  • Suited for resin minimal pigment concentrates

Solid content:            45%

Solvent:                      n-BA/PMA

Density:                      1.0 g/cm3

Amine value:             14 mg KOH/g

Color:                         Max 10

Appearance:              Yellowish clear liquid

Architectural coatings

Wood and furniture coating

Automotive and refinish coatings

Can and coil coating

Pigment concentrates

Protective coatings

Amount of solid additive based on pigment (SOP):

  •  Inorganic pigments                                  2 – 5%
  • Titranium dioxide                                      1 – 3%
  • Organic pigments                                 15 – 30%
  • Carbon Black                                         20 – 40%
 
The above recommended levels can be used for orientation and needs to be optimized by testing.
EN
CN
Order sample
EN
CN

UNIQ®SPERSE 710S

[:en]UNIQ®SPERSE 710 S is a wetting and dispersing additive for solvent based coating systems. The dispersant is especially suitable for inorganic pigments, extender pigments. For TiO2 millbase viscosities will be strong reduced so higher pigment loading in the mill base process can be achieved.

Order sample

          Technical Data sheet

EN
CN

UNIQ®SPERSE 745 S

[:en]UNIQ®SPERSE 745 S is a wetting and dispersing additive for solvent-borne applications. It is very suitable for industrial, architectural and protection coatings. It can give excellent dispersing performance to inorganic, organic pigments or bentonite. Strong viscosities reduction so higher pigment and filler loading in the grinding process can be achieved. It can also improve the transparency and hiding power.

Order sample

          Technical Data sheet

EN
CN

UNIQ®FOAM 170S

UNIQ®FOAM 170 S is a strong anti-foam and air-release agent especially suitable for use in unsaturated polyesters, baking coatings, epoxies and acrylic/vinyl acetate combinations. The additive furthermore helps to improve the leveling.

Special features
Air spraying 100%
Airles spraying 60%
Dip / curtain coatings 100%
Brush / roller 60%

 

  • Quick de-aeration and defoaming effect for thermosetting resin system
  • Suitable for pigment loading coating systems
  • does not interfere intercoat adhesion
  • Silicone-free
  • Heat stable

Solvent:                      Naphtha (petroleum) hydrtreated heavy

Density:                      0.84 g/cm3

Color:                         Max 1

Appearance:              Slight hazy colorless liquid

Architectural coatings

Wood and furniture coatings

Automotive and refinish coatings

Can / coil coatings

Industrial coatings

  • Based on total formulation:              0.1 – 1.0%

Added in grinding stage or under high shear forces incorporation.

EN
CN
Order sample
EN
CN

UNIQ®SPERSE 560 S

UNIQ®SPERSE 560 S is a wetting and dispersing additive for solvent based automotive and industrial coatings and pigment concentrates. Especially in two-pack PU and baking systems with excellent reduction of millbase viscosity.

Also very well compatible with CAB and therefore well suited for basecoat. Gives excellent transparency with difficult pigments.

Special features
Color development 100%
Viscosity reduction 100%
Inorganic pgments 100%
Organic pigments 100%
Black pigments 90%
  • Solvent based applications
  • Suitable for both organic and inorganic pigments
  • Prevents flooding and floating
  • Excellent compatibility
  • Improves gloss and DOI
  • Good viscosity reduction

Solid content:            30%

Solvent:                      n-BA/PMA/Xylene

Density:                      0.95 g/cm3

Amine value:             8 mg KOH/g

Color                          Max 6

Appearance:             Yellowish clear liquid

Architectural coatings

Wood and furniture coating

Automotive and refinish coatings

Can and coil coating

Protective coatings

Amount of solid additive based on pigment (SOP):

  •  Inorganic pigments                                  2 – 5%
  • Titranium dioxide                                       1 – 3%
  • Organic pigments                                  15 – 40%
  • Carbon Black                                          20 – 60%
 
The above recommended levels can be used for orientation and needs to be optimized by testing.
EN
CN
Order sample
EN
CN

UNIQ®SPERSE 510S

UNIQ®SPERSE 510 S is a wetting and dispersing additive for solvent based coating systems. The dispersant is especially suitable for inorganic pigments, extender pigments and matting agents. For matting agents and TiO2 it will help to avoid hard sediments. In addition the matting agent orientation will be improved what will help to achieve faster your gloss level. UNIQ®SPERSE 510 S is also well suited for co-grinding process.

Special features
Color development 80%
Viscosity reduction 80%
Inorganic pgments 100%
Organic pigments 60%
Black pigments 60%
  • Solvent based applications
  • Help orientation of matting agents
  • Protects formation of hard sedimentation
  • Also suited for extender pigments
  • Excellent for co-grinding
  • Prevents flooding and floating
  • Improves hiding power

Solid content:            50%

Solvent:                      n-BA/PMA/Hydrocarbon C9

Density:                      0.98 g/cm3

Acid value:                14 mg KOH/g

Amine value:             6 mg KOH/g

Appearance:              Light yellowish clear liquid

Architectural coatings

Wood and furniture coating

Automotive and refinish coatings

Can and coil coating

Protective coatings

Amount of solid additive based on pigment (SOP):

  •  Inorganic pigments                                  2 – 5%
  • Titranium dioxide                                       1 – 3%
  • Organic pigments                                  20 – 40%
  • Carbon Black                                          15 – 40%
  • Mattig agents                                           5 – 10%
 
The above recommended levels can be used for orientation and needs to be optimized by testing.
EN
CN
Order sample
EN
CN